Model | (R7J49A) Aruba Access Point-615 (RW) Campus AP |
Wi-Fi Radio | Dual (2.4 GHz and 5 GHz) |
Interface | 1 x 10/100/1000BASE-T |
Antennas | 2×2 MIMO with peak antenna gain of 2.8dBi in 2.4 GHz , 4.5 dBi in 5 GHz and 4.5dBi in 6 GHz |
Power sources | POE (802.3at), PoE (802.3af) |
Warranty | Lifetime |
WiFi Type | WIFI 2.4 (802.11 a,b,g,n) WIFI 5 (802.11ac) , WIFI 6 (802.11ax) |
HPE Aruba Networking 610 Series Wi‑Fi 6E Campus Access Points
Fast, resilient, and secure Wi-Fi 6E connectivity in a compact and affordable platform
Key features
- ● Unlocks the 6 GHz band to more than double the available capacity in wireless networks
- ● Comprehensive dual radio/tri-band coverage across 2.4 GHz, 5 GHz, and 6 GHz to deliver up to 3.6 Gbps combined peak data rate1
- ● Compact and low power consumption — virtually unrestricted operation from an 802.3af (class 3) PoE source2
- ● Up to seven 160 MHz channels in 6 GHz to support low-latency, bandwidth-hungry applications like high-definition video, and augmented reality/virtual reality applications
- ● 2.5 Gbps Smart Rate Ethernet port to minimize wired bottlenecks
- ● Built-in GPS receivers and fine time measurement (802.11mc) to enable APs to automatically locate themselves and serve as reference points for accurate indoor location measurements
- ● Offered as optional eco-friendly 10-packs
Advantages of 6 GHz
Wi-Fi 6E provides up to 1200 MHz of additional unlicensed spectrum in the 6 GHz band for higher throughput and improved application performance. With up to seven 160 MHz channels, Wi-Fi 6E can better support low-latency, bandwidth hungry applications like high-definition video and augmented reality/virtual reality applications. Only Wi-Fi 6E capable devices can use the 6 GHz band so there is no interference or slowdowns due to legacy devices.
Device class support
The 610 Series APs are part of the low power indoor (LPI) device class. This fixed indoor-only class uses lower power levels and does not require an Automated Frequency Coordination service (AFC) to manage incumbent outdoor services, which is required for standard class APs.
Advantages of OFDMA
The 610 Series is equipped with OFDMA to handle multiple 802.11ax capable clients on each channel simultaneously, regardless of device or traffic type. Channel utilization is optimized by handling each transaction via smaller sub-carriers or resource units (RUs), which means that clients are sharing
a channel and not competing for airtime and bandwidth.
Wi-Fi optimization Client optimization
HPE Aruba Networking’s patented Ai-powered technology eliminates sticky client issues by steering a client to the AP where it receives the best radio signal. ClientMatch steers traffic from the noisy 2.4 GHz band to the preferred 5 GHz or 6 GHz band depending on client capabilities and AP settings. ClientMatch also dynamically steers traffic to load balance APs to improve the user experience.
HPE Aruba Networking advanced cellularcoexistence (ACC)
Unique to HPE Aruba Networking, Advanced Cellular Coexistence uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment.
Intelligent Power Monitoring (IPM)
For better insights into energy consumption, HPE Aruba Networking APs continuously monitor and report hardware energy usage. Unlike other vendor’s access points, APs can also be configured to enable or disable capabilities based on available PoE power — ideal when wired switches have exhausted
their power budget. Enterprises can deploy Wi-Fi 6E APs and update switching and power at a later if needed based on their actual usage.
สนใจ Access Point อื่นๆ นอกจาก AP615
เลือกดูได้ที่ หน้าสินค้า Access Point ของเรา